Detailed Product Description

GH12(Homopolymer Polypropylene)
General Purpose
Suggested Uses Include General Purpose Injection Molding

Property                                                   Units         Typical Value                Test Method
Nominal Melt Flow Rate (230°C/2.16kg)     g/10 min           12                          ASTM D1238

Tensile Strength at Yield                             psi               5,400                        ASTM D638
(2 in/min, 50 mm/min)                                MPa               37

Elongation at Yield                                      %                  9                            ASTM D638
(2 in/min, 50 mm/min)

Flexural Modulus                                        psi              230,000                     ASTM D790A
(0.05 in/min, 1.3 mm/min, 1% secant)         MPa             1,586

Notched Izod Impact Strength at 23°C       ft-lbs/in             0.6                          ASTM D256A
                                                                 J/m                32

Rockwell Hardness                                      R                  106                          ASTM D785